RV Lap Sealant

Liquid Rubber RV Lap Sealant offers excellent adhesion to clean substrates which allows it to be used without a primer in most circumstances. This  self levelling, 100% solids, moisture cure and waterproof product is designed to fill joints and crevices, can be applied to damp concrete or other damp substrates and will not out-gas or bubble. It is also safe to use in confined spaces.
Regular price $19.95 Regular price
Size:
Color:
White
Due to computer monitors, colors may not be exactly as shown.
Also available to purchase on

RV Lap Sealant

Product Details

Liquid Rubber RV Lap Sealant offers excellent adhesion to clean substrates which allows it to be used without a primer in most circumstances. This self levelling, 100% solids, moisture cure and waterproof product is designed to fill joints and crevices, can be applied to damp concrete or other damp substrates and will not out-gas or bubble. It is also safe to use in confined spaces.

Products that prove themselves

Durable
Safe
Easy to Use

Popular Uses

Liquid Rubber Lap Sealant

  • EPDM/TPO
  • Aluminum
  • Fiberglass
  • PVC
  • And More

Coverage

Approximately 22 linear feet (6.7m) at 5/16” (8mm) thickness per 10oz cartridge.

Applying thicker will provide less linear feet.

Typically 4 tubes for a 30 foot RV.

 


Documents

For Step-By-Step Guides Specific to Your Project

1 Circle around step number design detail

Apply to clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease, coal tar, or other contaminants.

2 Circle around step number design detail

Use Liquid Rubber RV Smart Cleaner to clean the surface thoroughly before applying. Read our application guidelines for more information.

3 Circle around step number design detail

Tape off the area to ensure a clean and neat application and to protect elements you want to protect. Pull tape as soon possible.

4 Circle around step number design detail

Cut tip to size and puncture internal seal. Small screwdriver works.

5 Circle around step number design detail

Apply lap sealant generously to area.

6 Circle around step number design detail

Tooling, if necessary, should be done before skinning takes place.

7 Circle around step number design detail

Allow 24 hours before coating (Full strength is achieved in 7 days).

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Chris Chovaz
Lap sealant

Works flows well when applied