Garden Pump Sprayer

Using a garden pump sprayer is simple. First, fill the tank with water or your desired liquid. Screw the cap tightly and pump the handle to build pressure. Adjust the nozzle to your preferred spray pattern—either mist or stream—then press the trigger to start spraying. Always release any excess pressure using the pressure release valve after use.

Yes! Our garden pump sprayer is compatible with a variety of liquids, including Liquid Rubber Mulch Glue, water, fertilizers, insecticides, and even homemade plant solutions. However, it’s important to thoroughly clean the sprayer after each use to prevent cross-contamination and parts gumming up, especially when switching between chemicals and water.

To maintain your sprayer, rinse it out thoroughly after each use. Make sure to pump fresh water through the sprayer to clear out the nozzle and hose. Regularly check the seals, hose, and trigger to ensure everything is intact. If needed, lubricate the pump mechanism to keep it working smoothly.

The capacity of our garden pump sprayer is 1.3 Gallons, allowing you to cover large garden areas without frequent refills. The actual coverage depends on the spray setting and the type of liquid being applied, but typically, our sprayer can handle an average-sized garden comfortably on a single fill. When using Liquid Rubber Mulch Glue in your garden sprayer, fill the sprayer with 1 Gallon of Mulch Glue and spray 1 coat using 1/2 Gallon over 50 sq ft. When dry, apply the last 1/2 gallon (2nd coat) over 50 sq ft.

Absolutely! The garden pump sprayer is versatile and can be used indoors for tasks like spraying houseplants or cleaning surfaces. Just make sure to adjust the nozzle for a fine mist to avoid over-spraying and be cautious with any chemicals that may not be suitable for indoor use. Always rinse thoroughly before switching from garden use to household use.