Your driveway is more than just a place to park your car; it's an essential part of your home's curb appeal. With time and use, however, it may start to lose its shine and develop cracks, taking away from the overall aesthetics of your property. That's when driveway coatings come to the rescue.
Resealing your asphalt driveway is not just about restoring its aesthetics; it's about prolonging its lifespan and saving money on costly repairs or replacements. This comprehensive guide to driveway coatings DIY will give you all the information you need to maintain and protect your driveway, saving a fortune in the long run.
Understanding the Importance of Driveway Sealing
Before we dive into the nitty-gritty of DIY driveway coatings, let's understand why this process is so crucial. Driveway sealing acts as a barrier, protecting your driveway from harmful elements like UV rays, snow, oil, and chemicals. If left unprotected, these elements can cause significant damage over time, leading to costly repairs or replacements.
By sealing your driveway, you're essentially adding an extra layer of protection. This not only helps preserve the structure and appearance of your driveway but also extends its lifespan. The cost of sealing a driveway is significantly less than replacing it, making it a cost-effective solution for long-term maintenance.
Choosing the Right Driveway Coating
When it comes to driveway coatings, not all products are created equal. The type of sealer you choose can make a significant difference in the longevity and appearance of your driveway. Here's where the Liquid Rubber sealant shines.
Liquid Rubber Driveway Restore is a water-based, non-toxic compound that's safe for the environment and your family. Its user-friendly application process makes it a top choice for DIY enthusiasts. It's designed to fill and seal existing cracks while creating a new layer of protective, rubberized coating on the asphalt's surface. This adds years of use to your driveway while enhancing its look.
The affordability and reliability of Liquid Rubber Driveway Restore makes it an excellent choice for DIY driveway coatings. It doesn't emit VOCs (Volatile Organic Compounds), which poses a risk to your family's health, making it a safe choice for household use.
The Best Time to Reseal Your Driveway
Timing is an essential factor when it comes to resealing your driveway. For best results, the process should be done during the warmer months, ideally in late spring or early summer, when the temperature is above 50 degrees Fahrenheit. This is because sealants need a certain level of heat to cure properly.
Additionally, you should avoid resealing during rainy or snowy days as water can interfere with the sealing process. Make sure there's no rain forecasted for at least 24-48 hours before or after your planned application.
Prepping Your Driveway for Sealing
Proper preparation is key to successful driveway sealing. Start by inspecting your driveway for cracks or other damage. Clean any oil or grease stains with a stiff-bristled brush and a degreasing detergent. (Make sure you have a dry surface that is free of dirt, loose paint, rust, oil, grease, coal tar, silicone, or other contaminants.) For larger cracks or holes, you'll need to fill them in with a driveway caulking or patching compound before applying the sealant.
Once your driveway is clean and free of damage, it's time to prepare the area for the sealant. Trim any overgrown shrubs or grass along the driveway edges and mask any adjoining areas to prevent the sealant from staining them.
Applying the Driveway Coating
With your driveway prepped and ready, it's time to apply Liquid Rubber Driveway Restore. Apply using an 18" foam squeegee or roller (use a 6-12" brush for edges). Apply when temperature is above 10ºC/50°F and rising and avoid direct sunlight. Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in.
Pour the Liquid Rubber sealant in a thick, even layer across the driveway from one side to other. Use a squeegee or broom to spread the sealant evenly, ensuring full coverage as you pull the coating towards you. To maintain an even coat make sure you are using an 18” squeegee or a large push broom. If your driveway has a large surface area, you might want to divide it into sections and work on one section at a time.
Once you've applied the first coat, let it dry thoroughly before applying the second coat, typically at least 12 hours or more. This allows the sealant to penetrate the asphalt deeply, providing more durable and long-lasting protection.
Letting the Driveway Sealer Cure
After applying Liquid Rubber Driveway Restore, you'll need to let it cure for at least 48 hours before driving or walking on it. During this time, the sealant will harden and bond with the asphalt, forming a protective barrier against wear and tear.
After the final coating has dried sufficiently enough to walk on and not cause damage, inspect the area for uniformity of membrane thickness and coverage. Ensure at least 48 hours (or until dry to the touch) of dry weather before allowing vehicle traffic.
Caring for Your Sealed Driveway
Even after sealing, your driveway will still need regular maintenance to keep it in top shape. Sweep away leaves, seedpods, and other debris regularly. If you notice any oil or gas spills, clean them up promptly to prevent staining and damage.
Saving a Fortune with DIY Driveway Coatings
By sealing your driveway yourself, you can save a significant amount of money on labor costs. With the right materials and a bit of elbow grease, you can restore the look of your driveway and extend its lifespan, all while saving a fortune on potential repair or replacement costs.
With Liquid Rubber Driveway Restore, you get a cost-effective, easy-to-use solution that delivers professional-grade results. So why wait? Roll up your sleeves, get your DIY gear ready, and give your driveway the care it deserves. You'll be amazed at the difference a little driveway coating can make!